Blade putters in Australia 2026: Newport 2, Ai-DUAL #1, Anser 30, and blades on couch or bent greens
Three heel-toe blades listed new in Australia this month, from A$439.95 to A$839.95, share a 3-degree loft, a 70-degree lie and toe hang made for an arcing stroke. What the makers publish, what owners praise and criticise, and how to try a blade on grainy couch or quick bent before you buy.
In brief
- The blades: Scotty Cameron Studio Style Newport 2, Odyssey Ai-DUAL #1 and Ping PLD Milled Anser 30, with the Ping 2025 Scottsdale Anser as a cheaper Anser.
- Australian prices read on 3 November 2026: A$746.95 for the Scotty Cameron, A$439.95 for the Odyssey, A$839.95 for the Anser 30 and A$419.95 for the Scottsdale Anser, none discounted.
- Golfers praise feel, feedback and a smooth roll; the recurring complaints are an Odyssey insert some find dead, disagreement about firmness, a small toe hang change on the Anser 30 and high prices.
- Film your stroke first: an arc suits a blade with toe hang, a straight path a face-balanced mallet; try the putter on your own couch or bent greens, never on a freshly cored one.
Spring is when Australian greens wake up. The couch in Brisbane, Sydney and Perth starts growing hard again, the bent on Melbourne’s sandbelt and in Adelaide gets cut low and rolled for the summer pennants and club championships, and a lot of golfers decide that this is the season to finally sort out the putter. If the one in your bag is a classic heel-toe blade, or you are wondering whether to go back to one, this page is for you. It looks at three blades listed new by an Australian golf chain on 3 November 2026, from A$439.95 to A$839.95, plus a cheaper Anser for comparison, and at the question that matters more than the badge: does your stroke actually suit a blade?
Nobody at Panxis Golf rolled a single putt with any of these putters. What follows is a presentation of what the makers publish, what the putters cost here, and what golfers say about them in public. If you have already decided you want something bigger behind the ball, our page on mallet putters for grainy couch and fast bent greens deals with the other half of the putter wall.
First, film your stroke
Before you look at any price tag, prop your phone on a chair behind you on the practice green, at hip height and looking straight down the line, and hit a dozen putts of about 3 metres. Then watch the putter head from above. If it swings inside the line going back, squares up at the ball and moves inside again after impact, your stroke has an arc. If it stays close to the line the whole way, your stroke is fairly straight. Most golfers have at least a little arc, even those who are sure they push the putter straight back and through.
That arc is what a blade is built around. A classic blade is shafted at the heel, so when you balance the shaft on one finger, the toe drops towards the ground. That droop is called toe hang. It lets the face open on the backswing and close through impact without you having to think about it, in step with an arcing path. A large mallet usually does the opposite: balanced so the face points at the sky, it resists turning and suits a straighter path. Choose a blade for a straight stroke and you may find yourself fighting a face that wants to open. Choose a face-balanced mallet for a strong arc and the face can arrive late and leave putts right of the hole for a right-hander.
Three other differences follow from the shape. A blade has its weight near the face, split between heel and toe, so a putt struck off the toe twists the head more and comes up shorter than the same miss with a mallet. Because it twists, a blade also tells you more clearly when you have missed the sweet spot, which some golfers value and others find discouraging. And a blade gives you far less to aim with: usually one short sight line or a dot on the top edge, where a mallet often carries long lines, wings or a frame.
Three makers, three ways of describing balance
All three blades presented here have toe hang, but you would not guess it was the same idea from the spec sheets.
- Odyssey uses degrees. It gives 40 degrees of toe hang for the Ai-DUAL #1, one of the few blades sold here with a hard number.
- Scotty Cameron uses a word. It speaks of “toe flow”, graded from minimum to maximum, and lists the Studio Style Newport 2 as “Medium”.
- Ping describes your stroke instead. On its page for the PLD Milled Anser 30 there is no toe hang figure at all, only a stroke type: “Slight Arc”.
None of these translates neatly into the others, so do not try to rank the three on paper. A fitter with a toe hang gauge, or simply your finger under the shaft in the shop, will show you more in ten seconds. The useful point is that all three are designed for a stroke with some arc, and none of them is meant for a dead-straight one.
Scotty Cameron Studio Style Newport 2
The Newport 2 is the putter that most blades are compared with, and the current Studio Style version arrived in shops in March 2025. Scotty Cameron’s published details: a head milled in the United States from 303 stainless steel with a misted finish; a Studio Carbon Steel face insert with a chain-link milling pattern and an electroless nickel plating to keep rust away; an I-Beam plumbing neck and full-shaft offset; 3.5 degrees of loft and a 70-degree lie; “Medium” toe flow. Scotty Cameron does not give a head weight in grams. It gives the two tungsten sole weights instead, 35 grams each in a 33-inch putter, 30 grams at 34 inches and 25 grams at 35 inches, so the head stays balanced as the shaft gets longer. The maker also describes a slightly thicker top line than earlier Newports, a tri-sole design and a Full Contact Slim grip, and offers a left-handed Newport 2 in 33, 34 and 35 inches.
Australian price, November 2026: A$746.95 new at an Australian golf chain, shown in stock, with no discount. On the day the listing was read, the only version offered online was a right-handed 35-inch model, so left-handers and anyone wanting a shorter shaft should expect to order through a fitter or a pro shop.
Odyssey Ai-DUAL #1
The Ai-DUAL range is Odyssey’s January 2026 line, and the #1 is its traditional heel-toe blade, with rounded bumpers at each end and a crank hosel (hence the “CH” in the full name). Odyssey publishes a 350-gram head, 3 degrees of loft, a 70-degree lie and 40 degrees of toe hang, and says the crank hosel gives the head significant toe hang for strokes with more face rotation and arc. The face is the part Odyssey talks about most: a two-layer insert, soft urethane on the outside over a firmer layer behind, which the company says was designed with artificial intelligence to keep ball speed consistent across the face. The grooves in the face, which Odyssey calls Forward Roll Design, are cut at a 19-degree slope to get the ball rolling sooner. The SL 90 steel shaft carries 20 grams of counterweight in the butt end, and the grip is a midsize pistol. Odyssey lists lengths of 33, 34 and 35 inches.
Australian price, November 2026: A$439.95 new at an Australian golf chain, no discount. Only the right-handed 35-inch version showed as available online that day; the 34-inch right-handed and the left-handed listings were marked unavailable. That makes it the cheapest of the three current blades here by a long way, a little over half the price of the Scotty Cameron.
Ping PLD Milled Anser 30
If the Newport is the reference, the Anser is the original: Ping’s heel-toe shape is the one the whole family descends from. The PLD Milled Anser 30 belongs to Ping’s 2025 PLD Milled range, and the “30” refers to a longer neck that changes the balance compared with a standard Anser. Ping describes it as a precision-milled Anser with heel-toe weighting and a high moment of inertia, aimed at a slight-arc blade player who tends to miss right, who will “have an easier time squaring the face at impact”. Ping’s published specification: blade head with its H1 hosel and full-shaft offset, a shallow-milled face that Ping says gives a firmer feel and consistent ball speed, a satin finish, a 355-gram head, 3 degrees of loft (adjustable from 2 degrees less to 3 degrees more at fitting) and a 35-inch standard length. Ping writes the lie as 20 degrees, plus or minus 4: it measures from the vertical, so that is the same 70 degrees the other two makers quote.
Australian price, November 2026: A$839.95 new at an Australian golf chain, in both right and left hand, no discount. It is the dearest blade on this page, which is worth keeping in mind when you read the criticisms below.
A cheaper Anser, and a blade that is missing
The same chain also lists the Ping 2025 Scottsdale Anser at A$419.95, in both hands. Ping’s own description, reproduced on the listing, calls it heel-toe weighted for stability and forgiveness, with a back cavity and a single sight line, and a hosel designed to help slight-arc players start putts on line. It is not milled from a solid block like the PLD, and Ping’s figures for it could not be read on a maker’s page today, so none are given here. But if what you like is the Anser shape rather than the milled finish, it costs half as much as the Anser 30.
Readers of American golf media may wonder where the Bettinardi BB-1 is. The 2026 BB Series is one of the newer blades on the market, but no Bettinardi putter was listed by the Australian chain whose prices this page uses, and no other Australian price was read for it. It is left out rather than priced from overseas.
The three blades side by side
| Putter | In shops | Balance, as the maker puts it | Head weight | Loft / lie | Hands listed in Australia, 3 Nov. | New, Nov. 2026 |
|---|---|---|---|---|---|---|
| Scotty Cameron Studio Style Newport 2 | March 2025 | “Medium” toe flow | Not published | 3.5° / 70° | Right hand, 35 in. | A$746.95 |
| Odyssey Ai-DUAL #1 | January 2026 | 40° toe hang | 350 g | 3° / 70° | Right hand, 35 in. (others unavailable) | A$439.95 |
| Ping PLD Milled Anser 30 | 2025 | “Slight Arc” stroke | 355 g | 3° / 70° (20° in Ping’s notation) | Right and left hand | A$839.95 |
Look along the loft and lie columns and the three are almost interchangeable. What separates them is the face (a carbon steel insert, a two-layer urethane insert, a shallow-milled solid face), the finish, the brand and A$400 between the cheapest and the dearest.
What golfers are saying
These are the themes that come up again and again in golf forums, in owner reviews on retail sites and in published equipment reviews. They are recurring impressions, not a count, and none of them is ours. No Australian forum thread dealing specifically with these three putters turned up, so most of the comments come from international forums and from British and American reviews.
What owners praise
- Feel and feedback, which is why people buy a blade. Golfers who return to a blade after years with a mallet nearly always give the same reason: they want to feel where on the face the ball came off. Several say they judge pace better with a blade even if they start the ball on line more often with a mallet.
- A quieter, softer Newport. Owners of the 2025 Newport 2 often describe a softer strike and a more muted sound than earlier Newport 2s, with a face that still tells them about a mishit.
- A smooth roll from the Odyssey insert. Reviewers of the Ai-DUAL #1 describe a soft yet connected feel and a roll that stays consistent across the face, which is unusual praise for a heel-toe blade. Anser 30 owners, for their part, like that the longer neck is not noticeable when they stand over the ball.
What owners criticise
- An insert that some find dead. The complaint that keeps coming back about the Ai-DUAL is that the outer layer is too soft, to the point of barely feeling the ball, and some golfers say they preferred the previous Ai-ONE insert. One reviewer also found the putter left early putts short before the adjustment came.
- Disagreement about firmness. Ping says the PLD’s shallow-milled face is firmer; some owners describe it as soft. Some Newport 2 owners find its insert firmer than they expected, others find it softer than the old one. The lesson is that feel on paper means very little.
- A smaller change than the name suggests. Forum members who own both versions put the difference at only a degree or two less toe hang than on the standard Anser, so if you are hoping the longer neck will cure a big miss to the right, you may be disappointed.
- Price and finish details. The cost of Scotty Cameron and Ping milled blades is criticised in nearly every review; the Newport’s chain-link face milling divides opinion on looks; reports of uneven insert milling on some Newport demo putters circulate in forums, mostly second-hand; and one reviewer found the Ai-DUAL #1 looked less premium than Odyssey’s older milled blades.
For measured verdicts from people who did put these putters through their own tests, read the published reviews: Golf.com on the 2025 Studio Style range, Today’s Golfer on the Ai-DUAL #1, Golfalot on the Ai-DUAL #1 and Plugged In Golf on the PLD Milled range.
Where to try and buy a blade in Australia, on couch or bent
The greens you putt on most should decide where and how you try a blade, because the feel and pace control a blade promises only mean something on a real surface.
If you play on couch. Across Queensland, northern New South Wales, much of Western Australia and the Top End, most greens are couch or a similar warm-season grass. In late spring and summer it grows fast and has grain: putts into the grain slow down and need a firmer hit, putts down-grain run on. Golfers on these greens often prefer a face that feels firm enough to give them a clear sense of how hard they hit it. A soft insert that feels lovely on a carpet can feel vague on a grainy 6-metre putt back up the slope. Ask to try the putter on a real green, and hit putts both with and against the grain.
If you play on bent. On Melbourne’s sandbelt, in Adelaide, Canberra and much of Tasmania, bentgrass greens cut for summer competitions can be very quick. There, the opposite often applies: a short stroke and a softer face help control pace on fast downhill putts. Try the putter on the quickest putts you can find, from 1 to 2 metres downhill, not just on flat 3-metre putts.
And not on a freshly cored green. Many clubs core or dust their greens in spring. For a week or two the ball bounces and runs slowly, which tells you nothing about a putter. If your green has just been done, wait or try somewhere else.
Where to try them:
- Large golf superstores carry Scotty Cameron, Odyssey and Ping, often with an indoor putting green, and some have a putting studio with a camera system that measures path, face angle and strike point. Use it to compare a blade and a mallet of a similar weight on the same putts, at 2 metres and at 10 metres.
- Independent fitters and brand demo days are where you settle toe hang, lie and length. Ping in particular builds to order; it is worth having lie and length checked before you pay A$839.95 for a putter that will not sit flat.
- Your club’s pro shop can order all three and often has demo putters. Ask to take one out for a full round on your own greens rather than ten minutes on the practice putting green.
- Second-hand, from specialist used-club sellers or club noticeboards, is a sound way to buy a blade. The classic shapes change little from one year to the next, and a fully milled head like the PLD has no insert to wear out. Check the face and sole for dents; a worn grip costs little to replace.
Wherever you buy, ask about the return policy and the warranty before you pay, and ask whether the putter on the shelf is the length you need or will have to be ordered or cut down.
Blade or mallet: a two-minute decision
- Your phone video shows a clear arc, you mostly strike the middle of the face and you miss on pace rather than line: a blade with toe hang, like the three here, is a natural fit.
- Your stroke looks straight and you often miss putts on line: try a face-balanced mallet first; a blade will probably feel as if the face keeps opening.
- Your strike is all over the face: the extra forgiveness of a mallet will save you more strokes than the feedback of a blade gives you.
- You are not sure: try one blade and one mallet of similar weight on your own greens, and keep the one you aim more confidently and whose pace you trust.
On budget, the Ai-DUAL #1 is the cheapest of the three current blades at A$439.95, the Scottsdale Anser costs less again if you just want the shape, and a used Newport-style blade from a few seasons ago rolls a ball as well as a new one.
How this page was put together
This page presents products and summarises public opinion. It is not a test: nobody at Panxis Golf putted with these putters, and nothing on this page was measured by us. Specifications come from the makers’ published material: Odyssey’s and Ping’s own product pages, Scotty Cameron’s specifications as reproduced in retailer tables, the maker descriptions shown on Australian product listings, and launch dates reported by Golf.com. Where a maker publishes no figure, such as the head weight of the Scotty Cameron or the toe hang of the Ping, this page says so rather than estimating it.
Prices were read on 3 November 2026, in Australian dollars, at Drummond Golf (drummondgolf.com.au), as were the hands, lengths and availability noted above. None of the three was shown at a reduced price that day. Prices change with promotions and stock, so the figure at the counter is the one that counts.
What golfers say was read in the GolfWRX forums, The Sand Trap and The Hackers Paradise, in owner reviews on retail sites and in published reviews from Golf.com, Today’s Golfer, Golfalot, MyGolfSpy and Plugged In Golf. Some forum pages could only be read through search engine extracts; only themes that came up in more than one place, or that a published review confirms, have been kept. Nobody is quoted by name, nothing is counted, and no impression is presented as a statistic. There is no commercial link on this page, no affiliate arrangement and no commission of any kind. If content on this site is ever paid for by a brand, it will carry an advertising notice at the top of the page, before the first line.






