Skip to content
Gear

Blade putters 2026: four current models, toe hang, and when a blade beats a mallet

Four current heel-toe blades, from Scotty Cameron, Odyssey, Ping and Bettinardi, share a 3-degree loft, a 70-degree lie and toe hang built for an arcing stroke, yet sold new in November 2026 for anything from $249.99 to $499. Before the brand, the question is whether your stroke suits a blade at all.

La rédaction Panxis Golf, U.S. desk (Mark Sullivan) · · 14 min
A golfer in a navy bucket hat putts beside the hole next to the yellow flag, with two golf bags standing on the fringe of the green
Photo Martin Magnemyr / Pexels

In brief

  • The four blades are the Scotty Cameron Studio Style Newport 2, the Odyssey Ai-DUAL #1, the Ping PLD Milled Anser 30 and the Bettinardi BB-1.
  • U.S. prices in November 2026: $499 for the Scotty Cameron, $249.99 for the Odyssey (regular $349.99), $449.99 for the Ping and $495 for the Bettinardi.
  • Golfers praise feel, feedback and classic looks; the recurring complaints are inserts that feel too soft or too firm, little forgiveness on mishits and high prices for near-identical specifications.
  • Choose by stroke: an arcing stroke suits a blade with toe hang, a straight one a face-balanced mallet; check balance, lie and length with a fitter and ask about returns.

Mallets take most of the putter wall in American golf shops this fall, yet the blade has not gone anywhere. Scotty Cameron, Odyssey, Ping and Bettinardi all sell a current heel-toe blade, the shape most golfers picture when they hear the word “putter”, and each one makes a different bet on feel, balance and price. In November 2026, the four presented here were listed new at U.S. retailers between $249.99 and $499. This page sets out what each maker publishes, what each costs and what golfers say about them, and first, how to tell whether a blade suits your stroke at all. It is a presentation of products and of public opinion, not a test. Nobody at Panxis Golf putted with any of these putters.

If you already know you want a mallet, our earlier page on five 2026 mallet putters and what golfers say about them covers that side of the wall. This one is about blades, and about the choice between the two.

Blade or mallet: what actually changes

The names describe the shape of the head, but four other things separate a typical blade from a typical mallet.

  • Balance, or toe hang. Rest the shaft on a finger near the grip and let the head settle. A face-balanced putter points its face at the sky. A putter with toe hang lets the toe droop toward the ground, a little or a lot. Most classic blades hang their toe noticeably; most large mallets are face-balanced or close to it. Toe hang lets the face open and close with a stroke that moves on an arc; a face-balanced head resists that rotation and suits a stroke that moves fairly straight back and through.
  • Forgiveness on off-center strikes. A mallet spreads its weight far behind and around the face, so it twists less when you catch the ball on the toe or the heel, and the ball loses less speed. A blade keeps its weight close to the face, mostly in the heel and toe. It forgives less, and a poor strike shows up in the length of the putt.
  • Feel and feedback. Because a blade twists more on a mishit, you feel and hear it more. Blade fans call that information; others call it punishment.
  • Alignment. A mallet gives the eye long lines, wings or a frame to aim with. A blade usually offers one short line or a dot on the top rail and leaves the rest to your eye.

None of this makes one shape better. It means the right question is not “blade or mallet?” but “how does my stroke move, and how much help do I want with aim and mishits?”

Reading a toe hang figure

The four makers on this page describe balance in four different ways, which is one reason buyers get confused.

  • Degrees. Odyssey gives an angle: 40 degrees for its Ai-DUAL #1.
  • Fractions. Bettinardi uses a fraction of a full hang. Its BB-1 is listed at 1/2 toe hang: the toe points roughly halfway toward the ground.
  • Words. Scotty Cameron writes “toe flow” and grades it from minimum to maximum. The Studio Style Newport 2 is listed as “Medium”.
  • Stroke type. Ping does not publish a toe hang at all on the page for its PLD Milled Anser 30. It classifies the putter by the stroke it is built for, in this case “Slight Arc”.

So these figures do not compare precisely across brands; a fitter’s toe hang gauge, or the finger test above, tells you more. What they do say is that all four putters here are built for a stroke with some arc.

Scotty Cameron Studio Style Newport 2: the reference shape

What Scotty Cameron published. The current Studio Style line opened for pre-order on February 25, 2025 and reached golf shops on March 14, 2025, at $499 for a standard putter. The Newport 2 is the shape most blades are measured against: a heel-toe head with a plumber’s neck, here an I-Beam Plumbing neck. The head is milled in the United States from 303 stainless steel with a misted finish, and the face carries a Studio Carbon Steel insert with a chain-link milling pattern; the insert has an electroless nickel plating against rust. The published specification is 3.5 degrees of loft, 70 degrees of lie, a full-shaft offset and a “Medium” toe flow. Scotty Cameron does not publish a head weight in grams. It publishes the two tungsten sole weights instead, which get lighter as the putter gets longer: 35 grams each at 33 inches, 30 at 34 inches and 25 at 35 inches. Left-handed versions exist in 33, 34 and 35 inches; in the same family, the Newport 2 Plus and several other heads are right-handed only.

The price in November 2026. New, $499 at a U.S. retailer, in stock. That is the launch price of March 2025, unchanged twenty months later.

Odyssey Ai-DUAL #1: the blade with a soft insert

What Odyssey published. The Ai-DUAL range reached stores in January 2026, and the #1 is its classic blade, sold with a crank hosel, which is where the “CH” in some listings comes from. Odyssey publishes a 350-gram head, 3 degrees of loft, 70 degrees of lie and 40 degrees of toe hang, and says the crank hosel is there to give the head significant toe hang for strokes with more arc and face rotation. The face is the Ai-DUAL insert: a soft urethane outer layer over a firmer inner layer, designed, Odyssey says, with artificial intelligence, with deeper “Forward Roll Design” grooves cut at a 19-degree slope. The SL 90 steel shaft carries a 20-gram counterweight in the butt end. Lengths are 33, 34 and 35 inches. Odyssey’s table lists both hands, but its model selector offered only right-handed on the day we read it, so ask before ordering a left-handed one. Odyssey publishes no offset figure there; a retailer’s table lists a full shaft.

The price in November 2026. New, $249.99 at a U.S. retailer, against a regular price of $349.99. The cut matches a $100 promotion that Odyssey advertises on its whole Ai-DUAL line. Promotions like this one tend to end without notice, so $349.99 is the safer figure for a budget.

Ping PLD Milled Anser 30: an Anser with less toe hang

What Ping published. The Anser is the shape the Newport family descends from. The PLD Milled Anser 30 belongs to the 2025 PLD Milled range. Ping describes a precision-milled Anser with heel-toe weighting and a high moment of inertia, meant, in the copy U.S. retailers reproduce, for a slight-arc player who tends to miss right. Ping’s page lists a blade head with its H1 hosel and a full-shaft offset, a shallow-milled face that Ping says gives a firmer feel and consistent ball speed, a satin finish and a 355-gram head. Loft is 3 degrees, with a fitting range of plus 3 to minus 2. Lie is written as 20 degrees with a range of 4 degrees either way: Ping measures lie from the vertical, so its 20 degrees is the 70 degrees other makers quote. The stroke type is “Slight Arc”, the standard length is 35 inches. Ping does not publish a toe hang figure on that page, and does not list left-handed availability there; a U.S. retailer lists the putter in both hands and in lengths from 33 to 36 inches.

The price in November 2026. New, $449.99 at a U.S. retailer, which states that no discount applies to Ping products and that the putter usually ships in two to four weeks.

Bettinardi BB-1: a 2026 blade with a new face

What Bettinardi published. Bettinardi opened pre-orders for its 2026 BB Series on January 20, 2026, with putters in shops from February 3, at $495 each. Every BB putter is milled from a single piece of 303 stainless steel. The BB-1 is its rounded, Anser-style blade, with a plumber’s neck, a full-shaft offset and 1/2 toe hang, for a moderate arc. The new feature is the face: Bettinardi calls it Variable Depth Flymill, milled in nine zones, deeper in the center and shallower toward the edges. Bettinardi reports that in its own Quintic testing the new face cut distance variation by 30 percent and topspin variation by more than 40 percent against a traditional Flymill face; those are the maker’s figures. The finish is a Savannah Blue PVD. The specification table reproduced by a U.S. retailer lists a 355-gram head, 3 degrees of loft, 70 degrees of lie and right-handed only for the BB-1, with a Lamkin Deep Etched grip. The series is offered in lengths from 33 to 38 inches. If you putt left-handed, the wider BB-8W in the same family is the blade listed in both hands.

The price in November 2026. New, $495 at a U.S. retailer, in stock, the launch price.

The four side by side

Putter In stores Balance as published Head weight Loft / lie Left-handed New, Nov. 2026
Scotty Cameron Studio Style Newport 2 March 2025 “Medium” toe flow Not published (sole weights only) 3.5° / 70° Yes, 33 to 35 in. $499
Odyssey Ai-DUAL #1 Jan. 2026 40° toe hang 350 g 3° / 70° Listed, check stock $249.99 (regular $349.99)
Ping PLD Milled Anser 30 2025 “Slight Arc” stroke type 355 g 3° / 70° (20° in Ping’s notation) Not published by Ping; listed by a retailer $449.99
Bettinardi BB-1 Feb. 2026 1/2 toe hang 355 g 3° / 70° No $495

The specifications are almost identical: about 3 degrees of loft, a 70-degree lie, a full-shaft offset and toe hang for an arcing stroke. You pay for the face, the finish and the name; on promotion, the cheapest costs half as much as the dearest.

What golfers are saying

What follows are themes that come back in golf forums, retailer reviews and published reviews, not a count. None of these comments is ours.

About blades in general. In long-running forum threads on blades and mallets, three ideas return again and again. Golfers who go back to a blade after years with a mallet usually say it is for feel and feedback: they want to know where they struck the ball. Several describe a trade-off, with a blade giving them better distance control and a mallet a better start line. And experienced posters keep repeating that toe hang matters more than head shape, because even a stroke that feels straight usually has some arc.

Scotty Cameron Studio Style Newport 2. For: a softer strike and a softer sound than earlier Newport 2s; a face that owners say stays smooth without losing the sense of where the ball came off it; and the classic shape and finish that buyers of the brand expect. Against: the price, a point reviews of Scotty Cameron blades routinely raise; the chain-link face milling, which divides owners on looks; reports of inconsistent insert milling on some demo putters, seen by forum members mostly second-hand; and a head that some find heavier than older Newport 2s while others find the insert firmer than they expected, which says mostly that feel needs to be tried in person.

Odyssey Ai-DUAL #1. For: a soft, quiet feel that reviewers describe as soft and connected at the same time; a smooth roll that stays consistent across the face, unusual praise for a blade; and a sleek, classic blade shape. Against: the insert that some golfers call too soft or “dead”, to the point of hardly feeling the ball, a complaint that keeps coming back in Ai-DUAL feedback threads; golfers who preferred the previous Ai-ONE insert; a look that one reviewer found less premium than older milled Odyssey blades; and a tendency to leave putts short at first, which the same reviewer expected to adjust to.

Ping PLD Milled Anser 30. For: a classic Anser shape with a little less toe hang than the standard version, which forum members describe as the option for a stroke that has drifted toward straight; a longer neck that owners say is not noticeable at address; and a milled feel that reviewers of the PLD range describe as soft yet responsive. Against: confusion over feel, since Ping describes the shallow-milled face as firmer while some owners describe the opposite, and custom and stock builds seem to feel different to different people; and a change in balance that owners put at only a degree or two less toe hang than the standard Anser, so golfers hoping the longer neck will fix a big miss to the right may be disappointed.

Bettinardi BB-1. For: feel, which one detailed review calls the best its author had rolled in over a year, solid up close and full on longer putts; the Savannah Blue finish, praised almost everywhere; and a face that the same review found measurably more consistent in ball speed than a plain milled Anser, though the gain was “meaningful but not obvious”. Against: a firmer feel than Bettinardi’s Queen B or Antidote putters for some forum members, and a “dull” one for others; and a one-piece blade that still rewards center strikes and is not a high-forgiveness design, despite the new face. Worth knowing, too: this head has no left-handed version.

For measured verdicts rather than opinions, read the independent reviews: Golf.com on the 2025 Studio Style line, Today’s Golfer on the Ai-DUAL #1 and MyGolfSpy on Odyssey’s two Ai-DUAL blades, Plugged In Golf on the PLD Milled range, Plugged In Golf on the 2026 BB1, and MyGolfSpy’s 2026 blade putter guide.

What the complaints have in common

Set side by side, the criticism of these four blades falls into three groups, and none of them is about one brand. The first is feel: the same face is “soft” to one golfer and “dead” or “dull” to the next, and a soft insert hides a mishit that a milled face would announce. The second is forgiveness: a blade, however modern its face, twists more on the toe and heel than a mallet does, and golfers who strike the ball all over the face notice it on long putts. The third is price against specification: four putters with nearly the same loft, lie and balance span $250, and the difference lies in materials and finish, not in anything a ball can measure.

Where American golfers can try and buy a blade putter

Big golf retail stores usually carry Scotty Cameron, Odyssey and Ping, and some carry Bettinardi; many have an indoor putting green, and some a camera-equipped putting lab that records face angle, path and impact point. Use it. Roll the same putts with a blade and a mallet of similar weight, from 6 feet and from 10 yards, and look at where the ball came off the face as well as where it finished.

Independent fitters and brand fitting days are the place to settle toe hang, lie and length. A fitter can tell you in a few minutes how much your stroke arcs and whether a blade’s toe hang matches it. Ping and Bettinardi both build to custom specifications, so a fitting before ordering avoids a putter that sits wrong at address.

The pro shop at your course can order any of these and often keeps demo putters. Ask whether you can take one out for a round rather than ten minutes on the practice green: a putter that feels right on the carpet can feel different on a real green. If you play on slick bentgrass in the North or on grainy Bermuda in the South, try the putter on the kind of green you play most, because pace and feel are what a blade is chosen for.

Specialist sellers of used clubs list each putter with photos and a condition grade. Blades are a good used buy, because the classic shapes change little from year to year, and a one-piece milled blade has no soft insert to wear. Check the face and sole for dings; a worn grip is cheap to replace. Whatever you buy, new or used, ask about the return policy before you pay.

A simple way to decide

Start with your stroke, not the brand or the shape. If your putter path arcs visibly, a blade with toe hang like the four here will feel natural and let the face rotate with you. If it moves nearly straight back and through, a face-balanced mallet will usually be easier to square, and a blade will feel like it wants to open. If you strike the ball all over the face, the extra forgiveness of a mallet is worth more than the feedback of a blade. If you strike it consistently and miss on pace rather than on line, a blade can give you the feel you are looking for.

Then try two or three heads with the right balance and keep the one you aim straightest and whose pace you trust, whatever its price. And if budget matters, the Odyssey is the cheapest new blade here while its promotion lasts, and a used Newport-style blade from a few years ago rolls the ball just as well as a new one.

How this page was put together

This is a presentation of products and a reading of public opinion, not a test; nobody at Panxis Golf putted with these putters, and nothing here was measured by us. Specifications come from the makers’ published material, read on Odyssey’s and Ping’s own pages and otherwise as reproduced in retailers’ specification tables (Carl’s Golfland for the Scotty Cameron Studio Style Newport 2, the Odyssey and the Bettinardi BB-1, Morton Golf Sales for the Ping’s lengths and hands) or reported at launch by Golf.com (launch dates and prices of the Studio Style line and the BB Series). Where a maker does not publish a figure, such as the head weight of the Scotty Cameron or the toe hang of the Ping, it is left out rather than estimated.

Prices were read on November 3, 2026, in U.S. dollars, because PGA TOUR Superstore’s pages could not be read on that date: at Carl’s Golfland for the Scotty Cameron, the Odyssey (regular and promotional price) and the Bettinardi, and at Morton Golf Sales for the Ping. Prices change often; the figure at checkout is the one that counts.

What golfers say comes from the GolfWRX forums, The Sand Trap and The Hackers Paradise, retailer customer reviews and published reviews (Golf.com, Today’s Golfer, Golfalot, MyGolfSpy, Plugged In Golf). Several forum pages refused access and were read only in search-engine extracts; we kept only themes that came back in more than one place or that a published review confirms. Nobody is quoted by name, nothing is counted, and no impression is presented as a statistic. There is no commercial link on this page, no affiliate arrangement and no commission of any kind. If content on this site is ever paid for by a brand, it will carry an advertising label at the top of the page, before the first line.

One article a day not enough?

The monthly letter gathers what was worth reading, without the noise.

Also worth reading

Parcours de notre annuaire

Milham Park Golf Club

Kalamazoo's municipal course beside Milham Park: 18 holes, par 72, 6,711 yards on the club's card, with a first nine from 1931 and a…

Monroe Golf Club

A private club in Pittsford, New York, near Rochester: a Donald Ross course opened in 1924, about 6,980 yards at par 70, home of…