Skip to content
Gear

Blade putters from £199 to £479: Newport, Anser or BB-1 on soft, slow British winter greens

Four current heel-toe blades share a 3-degree loft and a 70-degree lie, yet British shops priced them from £199 to £479 in November 2026. Before the badge comes the question of your stroke, and of the soft, slow and sometimes temporary greens you will putt on until spring.

La rédaction Panxis Golf, UK desk (Rachel Owen) · · 15 min
A golfer in a navy bucket hat putts beside the hole next to the yellow flag, with two golf bags standing on the fringe of the green
Photo Martin Magnemyr / Pexels

In brief

  • The blades: Odyssey Ai-DUAL #1 CH, Scotty Cameron Studio Style Newport 2, PING PLD Milled Anser 30 and Bettinardi BB-1 (2026), all built for an arcing stroke.
  • UK prices in November 2026: £199 for the Odyssey (was £299), £449 for the Scotty Cameron, £419 for the PING (list £450) and £479 for the custom-built Bettinardi.
  • Golfers praise feedback, softer new faces and clean looks; they complain of inserts that feel dead or dull, little forgiveness off-centre and high prices for near-identical specifications.
  • Check whether your stroke arcs, test feel on long firm putts, and borrow a demo from your club professional to try it on slow winter greens before you buy.

Walk into any British golf shop this November and the putter rack is mostly mallets: big heads, wings, white lines. Yet the heel-toe blade, the putter shape your grandfather probably carried, is still made by every serious brand, and four of them sell a current version in the UK. Their new prices in early November 2026 ran from £199 to £479, which is a wide spread for four heads that, on paper, are nearly the same. This page looks at what Scotty Cameron, Odyssey, PING and Bettinardi say about their blades, what golfers say about them, and whether a blade is a sensible thing to buy just as British greens turn soft, slow and sometimes temporary. One thing to be clear about from the start: nobody at Panxis Golf has putted with any of these four putters. This is a reading of published specifications, shop prices and public opinion, not a review.

Mallets were the subject of an earlier page, mallet putters 2026 and what slow, bumpy winter greens change, so none of those models appears here. If you are still undecided between the two families, the first sections below are written for you.

Is your stroke a blade stroke?

Before the brands, a short self-test. Put a ball on a flat carpet, lay two clubs on the floor either side of your putter head, a little wider than the head, and make some 10-foot strokes. Watch the putter, not the ball.

  • The head drifts inside on the way back and inside again after impact. Your stroke has an arc. Most golfers who putt with their shoulders and a natural posture fall into this group, even if they think they swing straight.
  • The head stays between the two clubs all the way. Your stroke is close to straight back, straight through.
  • The ball comes off the toe one time and the heel the next. Your strike is the bigger problem, and forgiveness will matter more to you than shape.

Every putter on this page is built for the first group. That matters more than the badge on the back.

What the word “blade” really buys you

A blade is a thin head with its mass pushed out towards the heel and the toe, and a neck that usually leaves the toe hanging when you balance the shaft on a finger. That toe hang is the key idea. A toe-hang putter likes to open on the backswing and close through impact, which matches an arcing stroke. A face-balanced head, the typical large mallet, resists turning and suits a straight one.

Three other trade-offs follow from the shape. A blade has less mass far behind the face, so a toe or heel strike twists it more and the ball comes up shorter. That same twist is what you feel in your hands, which blade players call feedback and mallet players call a nuisance. And a blade gives you less to aim with: often one sight line on the top edge, sometimes just a dot. On a 4-footer that can feel spare; on a 40-footer, many golfers say, it hardly matters.

Four ways of saying “toe hang”

If you try to compare these four putters on balance, you will find the brands do not speak the same language.

  1. Odyssey gives a number of degrees: 40 for the Ai-DUAL #1.
  2. Bettinardi gives a fraction: its BB-1 has “1/2” toe hang.
  3. Scotty Cameron uses a word, “toe flow”, and calls the Newport 2 “Medium”.
  4. PING names the stroke instead: the PLD Milled Anser 30 is a “Slight Arc” putter, and its page gives no toe hang figure.

So read these as a family hint, not a measurement you can line up in a spreadsheet. A fitter with a toe hang gauge, or your own finger under the shaft, will tell you more in ten seconds than four product pages.

Odyssey Ai-DUAL #1: the cheapest way into a blade

Odyssey launched the Ai-DUAL family in January 2026, and the #1 is its traditional heel-toe shape, sold with a crank hosel (hence the “CH” in its UK name). Odyssey’s published specification: a 350-gram head, 3 degrees of loft, 70 degrees of lie and 40 degrees of toe hang, with the crank hosel there to give the head “significant” toe hang for strokes with more arc. The face is a two-layer insert, soft urethane outside and a firmer layer underneath, which Odyssey says it shaped with artificial intelligence, with “Forward Roll Design” grooves cut at a 19-degree angle. The SL 90 steel shaft has a 20-gram weight in the butt end. Odyssey lists lengths of 33, 34 and 35 inches. It does not publish an offset figure on that page.

UK price, November 2026: £199 new at a British online retailer, shown against a previous price of £299. On that shop’s page it was offered right-handed only, in 34 or 35 inches. That £100 cut is a promotion, and promotions in November have a way of ending in December, so plan on £299 if you are not buying this week.

Scotty Cameron Studio Style Newport 2: the shape the others are judged against

The current Studio Style line reached shops in March 2025. The Newport 2 is Scotty Cameron’s version of the most copied putter shape in golf: a heel-toe blade with a plumber’s neck, here called I-Beam Plumbing. It is milled from 303 stainless steel with a misted finish, and the face holds a Studio Carbon Steel insert, milled in a chain-link pattern and nickel-plated against rust. Published specification: 3.5 degrees of loft, 70 degrees of lie, full-shaft offset, “Medium” toe flow. Scotty Cameron publishes no head weight. Instead it lists two tungsten sole weights that change with length: 35 grams each at 33 inches, 30 grams at 34 inches and 25 grams at 35 inches, so the head is heavier on a shorter putter. A left-handed Newport 2 exists in 33, 34 and 35 inches.

UK price, November 2026: £449 new at a British online retailer, right-handed in 34 or 35 inches on that page. No reduction was shown on the putter itself, only basket-wide discount codes.

PING PLD Milled Anser 30: the original, with a longer neck

Every plumber’s-neck blade on this page descends from the PING Anser. The PLD Milled Anser 30 is part of PING’s 2025 PLD Milled range. PING’s page lists a blade head with its H1 hosel, full-shaft offset, a satin finish, a 355-gram head and a shallow-milled face that PING says gives a firmer feel and consistent ball speed. Loft is 3 degrees, adjustable by fitting from minus 2 to plus 3. PING writes the lie in its own notation as 20 degrees, plus or minus 4: it measures from the vertical, so this is the same 70 degrees the others quote. Stroke type: “Slight Arc”. Standard length: 35 inches. Retailers describe it as the Anser for a slight-arc player who tends to miss right.

UK price, November 2026: £419 new at a British retailer, in stock in 33, 34 and 35 inches, right-handed, against a list price of £450 shown on the same page. PING pushes custom fitting hard on its putters, and that retailer asks buyers to confirm whether they have had a fitting before ordering.

Bettinardi BB-1: the newest, and made to order

Bettinardi’s 2026 BB Series went on pre-order in January 2026. The BB-1 is its rounded, Anser-type blade, milled from a single block of 303 stainless steel with a plumber’s neck, full-shaft offset and 1/2 toe hang, for what Bettinardi calls a moderate arc. The new part is the face, “Variable Depth Flymill”: nine milled zones, deeper in the middle and shallower at the edges. Bettinardi says that in its own Quintic testing this face reduced distance variation by 30 per cent and topspin variation by more than 40 per cent compared with its traditional Flymill face; those are the maker’s figures, not ours. The finish is Savannah Blue PVD. The series specification table lists a 355-gram head, 3 degrees of loft and 70 degrees of lie, and the BB-1 is right-handed only. Left-handers who want a Bettinardi blade from this series are pointed to the wider BB-8W.

UK price, November 2026: £479 new at a British retailer, sold as a custom-fit putter built on a 34-inch base with length, lie, loft and grip options, so expect to wait for it to be built rather than to collect it tomorrow.

At a glance

Putter Balance, as the maker puts it Head weight Loft / lie Left-handed New UK price, Nov. 2026
Odyssey Ai-DUAL #1 CH 40° toe hang 350 g 3° / 70° Right-handed only at the shop read £199 (was £299)
Scotty Cameron Studio Style Newport 2 “Medium” toe flow Not published 3.5° / 70° Exists, 33 to 35 in. £449
PING PLD Milled Anser 30 “Slight Arc” 355 g 3° / 70° (20° in PING’s notation) Not published on PING’s page £419 (list £450)
Bettinardi BB-1 (2026) 1/2 toe hang 355 g 3° / 70° No £479, custom built

Look down the loft and lie column and the point makes itself: four blades, one geometry. The £280 between the cheapest and the dearest pays for the face material, the milling, the finish and the name, not for a different way of rolling the ball.

What golfers are saying about these blades

British forums had surprisingly little to say about these exact 2025 and 2026 models, so most of what follows was read on large American forums (GolfWRX, The Sand Trap, The Hackers Paradise), in published reviews, including Golf Monthly and Today’s Golfer in the UK, and in customer reviews on shop pages. These are themes that keep coming back, not a vote, and none of it is our own opinion.

What blade owners praise

  • Knowing where the ball came off the face. Golfers who return to a blade after years with a mallet nearly always give this reason. A toe strike on a Newport or an Anser announces itself in the hands, and they say that makes them better at judging pace on long putts.
  • The softer, quieter strike of the new faces. Owners of the 2025 Newport 2 describe a softer sound than older Newports. Reviewers of the Ai-DUAL #1, including Golf Monthly on the wider Ai-DUAL range, single out the insert as one of the softest-feeling faces available. A detailed review of the 2026 BB-1 calls it solid on short putts and full on long ones.
  • A clean look at address. The classic shape keeps coming up: no lines or wings to distract, a thin top edge, and, for the Bettinardi, a blue finish that almost every comment praises. PING owners note that the longer neck of the Anser 30 is hardly visible when you look down at it.

What they complain about

  • Inserts that feel dead. The most common gripe about the Ai-DUAL #1 is that the soft face is too soft, to the point where some golfers barely feel the ball and leave putts short until they adjust. Some say they preferred Odyssey’s previous Ai-ONE insert. Bettinardi’s BB-1 gets the opposite complaint from a few owners, who find it firmer or duller than the brand’s Queen B models.
  • No hiding a mishit. Even with Bettinardi’s new face, owners and reviewers agree the BB-1 is a player’s blade, not a forgiving head, and the same is said of blades in general on longer putts struck off-centre.
  • The price for what is, in effect, the same putter. Scotty Cameron’s price is the classic complaint, and comments regularly point out that a Newport, an Anser and a BB-1 share almost every number. Some forum members also question the chain-link milling on the new Newport face on looks alone.
  • Smaller changes than the marketing suggests. Owners of the PLD Anser 30 say it has only a degree or two less toe hang than a standard Anser, so a golfer hoping the longer neck will cure a big miss to the right may be disappointed. Opinions on its feel also differ: PING calls the face firmer, while some owners call it soft.

For a measured verdict rather than a summary of opinion, read the independent reviews: Today’s Golfer on the Ai-DUAL #1, Golf Monthly on the Ai-DUAL insert, Golf.com on the 2025 Studio Style line, Plugged In Golf on the PLD Milled range and Plugged In Golf on the 2026 BB1.

A blade on a British winter green

Most putter shopping happens in spring, on a fast indoor surface, in a warm shop. A British golfer buying in November will use the putter first on something very different: greens that have been hollow-tined and sanded in autumn, cut higher for the winter, wet in the morning and slow all day, and on some days a temporary green mown into the fairway in front of a frozen or waterlogged main green.

Each of those conditions pushes the choice in its own direction.

  • Slow, wet greens ask for a longer stroke. A longer stroke with more arc makes the face rotate more, which is exactly what a toe-hang blade is built to cope with. If your stroke already arcs, winter is not the time to fight it with a face-balanced head.
  • A soft insert on a slow green can feel like nothing. The “dead” feeling some golfers report with soft inserts will be stronger when the ball has to be struck firmly to reach the hole. If you are drawn to the Ai-DUAL, try it on a putt you have to hit hard, not a 6-footer.
  • Bumpy, sanded or temporary surfaces punish a weak strike. On a rough surface, a ball that starts off the toe slower and with less forward roll bounces offline sooner. A blade does not forgive that strike, so honest feedback about where you hit it becomes very useful, as long as you are prepared to act on it.
  • Distance control matters more than line on a 15-yard winter putt. On slow greens with little break, most three-putts start with a first putt that stops short. Blade players say this is where feel pays; mallet players say the stability does the same job. Neither claim is measured here, but it is the right question to ask yourself.

Where to try a blade in Britain this winter

Your club professional first. Most pro shops can order any of these four brands and many keep a few demo putters. The advantage in winter is obvious: you can borrow one and putt on the greens you will actually play until March, slow and wet, rather than on a carpet. Ask whether you can take it out for a round and onto the practice green before a medal.

Large golf superstores and specialist fitting centres usually have an indoor putting green, and some have a camera system that shows face angle at impact, path and strike point. Use it to answer the stroke question at the top of this page. Then roll the same putts with a blade and a mallet of similar weight, from 6 feet and from 12 yards, and watch where the ball comes off the face as much as where it stops. Remember that the indoor surface will be faster and smoother than anything outside before April.

Brand fitting days. PING and Bettinardi both build to order in length, lie and loft, and PING encourages buyers to be fitted before ordering. A fitting before ordering a built-to-order putter avoids a head that sits toe-up or heel-up at address, which on a sloping winter green shows up quickly.

Online shops carry the widest stock and the sharpest November prices, but you cannot roll a putt through a screen. Check the return period and whether it covers a putter that has been used outdoors, and check which hand and lengths are really available: several of the pages read for this article offered only right-handed putters in 34 or 35 inches.

Second-hand. Blades are among the best used buys in golf. The shapes change little from one generation to the next, a fully milled head has no soft insert to wear out, and a previous-generation Newport, Anser or BB-1 will roll a ball on a soggy January green exactly as well as this year’s. Look for dents on the sole and top line and a face without deep marks, and budget for a new grip.

Five questions before you pay

  1. Does my stroke arc? If not, a toe-hang blade is the wrong starting point, however good it looks.
  2. Where do I strike the ball? If the honest answer is “all over the face”, a mallet will save you more strokes than feedback will.
  3. What length do I need? Most stock blades come in 34 or 35 inches; many golfers are better off shorter, and a fitter can tell you in minutes.
  4. Do I like the feel on a firm, long putt? That is the putt winter greens will ask of you most.
  5. Is the price a promotion? If so, compare it with the list price and decide whether you would still buy at that figure.

If you answer yes to an arcing stroke and a decent strike, any of the four is a reasonable blade, and the cheapest in November is the Odyssey while its reduction lasts. If the answers are less clear, borrow a demo from your club professional and putt with it through a few wet Saturdays before you decide.

How this page was put together

This is a neutral presentation of products and a reading of public opinion, not a test. Nobody at Panxis Golf putted with these putters, and nothing on this page was measured by us. Specifications come from the makers’ published material: Odyssey’s and PING’s own product pages, and for the Scotty Cameron Studio Style Newport 2 and the Bettinardi BB-1 the manufacturer specification tables reproduced on retailer pages, plus launch reports by Golf.com for the release dates. Where a maker does not publish a figure, such as the head weight of the Newport 2 or the toe hang of the Anser 30, it is left out rather than estimated.

Prices were read on 3 November 2026, in pounds sterling, at three British retailers: The Golf Shop Online for the Odyssey Ai-DUAL #1 CH (£199, previous price £299) and the Scotty Cameron Studio Style Newport 2 (£449), Clubhouse Golf for the PING PLD Milled Anser 30 (£419, list price £450 as shown by the retailer) and American Golf for the Bettinardi BB-1 custom-fit putter (£479). Prices change often in November and December; the figure at checkout is the one that counts.

What golfers say was read mainly on the GolfWRX forums, The Sand Trap and The Hackers Paradise, in customer reviews on retailer pages and in published reviews (Golf Monthly, Today’s Golfer, Golf.com, Golfalot, MyGolfSpy, Plugged In Golf). British forums produced little on these specific models. Some forum pages could only be read through search extracts, and only themes that appeared in more than one place, or that a published review confirmed, were kept. Nobody is quoted by name, nothing is counted, and no impression is presented as a statistic. There is no commercial link on this page, no affiliate arrangement and no commission of any kind. If content on this site is ever paid for by a brand, it will carry an advertising notice at the top of the page, before the first line.

One article a day not enough?

The monthly letter gathers what was worth reading, without the noise.

Also worth reading

Parcours de notre annuaire

Dundonald Links

Kyle Phillips's modern links at Gailes, on ground where Willie Fernie laid out a course in 1911: par 72, 7,100 yards on the club's…

Forest of Arden Country Club

Two Donald Steel courses on the Packington estate near Meriden: the Arden, a par 72 of 6,725 yards from the whites that hosted the…

Ganton Golf Club

Inland links of 1891 in the Vale of Pickering, shaped by Vardon, Colt and MacKenzie, host of the 1949 Ryder Cup and the 2003…