Skip to content
Gear

Golf headcovers: what they actually protect, and where to buy one in the U.S.

A headcover keeps club heads from hitting each other in the bag, saves the crown of your driver and the face of your putter, and shields a graphite shaft from the irons. It does not keep a club dry, and put back on wet it can start rust. Three headcovers Americans buy, what their makers publish and what golfers say.

La rédaction Panxis Golf, U.S. desk (Mark Sullivan) · · 14 min
AI-generated illustration: the top of a golf bag on a cart beside a fairway, with a navy and cream knitted pom-pom driver headcover, a black synthetic leather fairway wood cover and a grey putter cover next to the uncovered irons
Illustration générée par IA (OpenAI)

In brief

  • The headcovers: Titleist Jet Black Leather Driver Headcover, PING Icon Mallet Putter Headcover and Club Glove Gloveskin Premium Iron Covers.
  • U.S. prices in November 2026: $89.99 for the Titleist, $34.99 for the PING and $48.95 for the Club Glove set (out of stock).
  • Golfers praise clean driver crowns, quiet magnetic putter covers and leather that holds its shape; the top complaints are covers that fall off, covers left on the course, rust under wet covers and tight or loose fits.
  • Cover the driver and woods first, match the putter cover to the head shape, choose iron covers only for forged irons, carts or travel, and always dry the club before covering it.

Every golf bag has a few of them, and most golfers never ask what they are for. It goes on the driver and the putter because they came with one, and on the irons only if the player has an opinion on the subject. Yet a headcover does a precise job. It stops club heads hitting each other in the bag, it keeps a painted crown and a milled putter face looking the way they did in the shop, and it keeps the irons from chewing on a graphite shaft. It does not keep a club dry, it can hold water against steel if you put it back on wet, and it is not a travel case. Knowing which of these is which tells you where a headcover earns its place and where it is decoration.

This page presents three headcovers Americans buy, a leather driver cover, a putter cover with a magnetic closure and a set of iron covers, from $34.99 to $89.99 where a U.S. golf retailer listed a price, with what their makers publish and what golfers say about headcovers in public. It is a presentation of products and a reading of public opinion, not a test. Nobody at Panxis Golf fitted, carried or handled any of these headcovers for this page, and nothing here was measured by us.

What a headcover actually protects

The damage a headcover prevents happens mostly when nobody is swinging: a bag bouncing on a riding cart for four hours, sliding in a car trunk, dropped beside a tee. Each of those moments is a small collision between heads, and over a season they add up.

  • The crown and face of the woods. A driver or fairway wood has a large, painted crown and, on most modern models, a thin face. The sharp leading edge of an iron or a wedge swinging into that crown leaves a chip in the paint, sometimes a dent. It is the clearest case for a headcover.
  • The finish of a putter. Many putters have soft milled faces, polished or coated finishes and thin top lines. A putter head knocking against irons in the bag picks up nicks quickly, and a dent in a putter face is the one mark that can change how the ball comes off.
  • The shaft just below the head. A graphite shaft is made of layers of fiber and resin, and its paint and outer layer can be worn through where the irons rub against it, usually in the first few inches below the head. A headcover with a long “sock” that slides down over the top of the shaft covers that zone.
  • The irons, sometimes. Irons hit each other in the bag too, and leave the small marks golfers call bag chatter. Whether that matters is the most argued point in the whole subject, and it gets its own section below.

What a headcover does not protect

A headcover is a layer of fabric or leather. It is not waterproof, not a shell, and it dries nothing.

  • Water held against the club. A headcover put back on a wet club keeps the moisture in. On carbon steel irons and wedges, on raw or lightly finished putter faces and on the steel parts of a hosel, trapped moisture is how rust starts. A knit cover that soaked up rain on the course is a sponge sitting on the club in a dark trunk. The rule golfers repeat is simple: dry the head first, and at home, take the wet covers off and let both dry apart.
  • Travel. On a flight, the risk is to the shafts, which can snap where they leave the bag, not to the heads. A padded or hard travel case, and a stiff rod that stands taller than the driver inside it, do that job.

Materials and closures, what each one changes

  • Leather. Genuine leather is the premium choice. It holds its shape, slips back on with one hand and ages well if cared for. It is also the most expensive, it can stain if it stays wet, and a new leather cover is often tight on the head until it breaks in.
  • Synthetic leather and polyurethane. Most covers sold by club brands are made of polyurethane, often described as PU leather. It wipes clean, sheds water better than knit, costs less than leather and looks close to it. Cheap versions can crack at the seams with time.
  • Neoprene. The material of wetsuits, soft and thick, used for many iron covers and some putter covers. It cushions well and resists water, and it is usually the least expensive option.
  • Knit and wool. The traditional pom-pom headcover, still popular for drivers and woods. Knit goes on and off easily and protects against scratches. It soaks up rain, stretches over the years, and, as some owners have found, can catch on the adjustable weights of a modern driver head.

On putter covers, the closure is the second decision. A magnetic closure is quick and quiet: the flap snaps shut without the tearing sound of hook-and-loop fabric, which many golfers find distracting on a green. Its weakness is that a weak magnet lets the cover fall off. A hook-and-loop closure, the generic name for what is often called Velcro, holds firmly when new but wears out and collects lint, and it is noisy. Driver and wood covers rarely close at all: they rely on a snug fit and the length of the sock.

A number tag or rotating dial on a fairway or hybrid cover tells you whether you are pulling the 3-wood or the 5-wood without lifting it. On iron sets, check that the numbered covers match your clubs: some sets include an “X” or blank cover for a wedge.

Titleist Jet Black Leather Driver Headcover

Titleist sells its leather headcovers in collections, and the Jet Black is the all-black version, available for driver, fairway and hybrid. The driver cover is the subject here.

  • What the maker lists, as reproduced by a U.S. dealer: 100% leather; two-panel construction; a perforated leather club indicator; a Titleist Tour patch on the front; quilting detail. The dealer page read for this article did not list a lining, a closure, dimensions or the driver head sizes it fits.
  • Who it suits: a golfer who wants a real leather cover from a club brand, that holds its shape and slips on easily, and who is willing to keep it dry.

Price read in November 2026 at a U.S. golf retailer: $89.99, marked down from a listed $105.00.

PING Icon Mallet Putter Headcover

PING’s Icon covers carry the brand’s “Mr. PING” figure and come in blade and mallet versions. The mallet version is the one presented here, because mallets are the putters most likely to be sold without a cover that fits them once the original is lost.

  • What the maker lists, as reproduced by a U.S. dealer: a soft velour lining; decorative stitching; a debossed Mr. PING logo; a magnetic closure “helps secure your putter”; fits most mallet putters. The outer material was not published on the pages read for this article, either on the dealer page or on PING’s U.S. page for the blade version, so it is not given here.
  • Who it suits: a golfer with a mallet putter, PING or not, who wants a quiet magnetic closure and a padded inside, and who checks the fit on a large mallet before buying.

Price read in November 2026 at a U.S. golf retailer: $34.99. PING’s own U.S. site listed the Icon blade cover at $40.00.

Club Glove Gloveskin Premium Iron Covers

Club Glove is a specialist in travel bags and bag accessories, and its Gloveskin iron covers are a set of nine for golfers who want their irons covered.

  • What the maker lists, as reproduced by a U.S. dealer: nine covers, numbered 4 to 9, PW, SW and XW; fits both right- and left-handed clubs; “Gloveskin neoprene” described as feeling and looking like leather; a water-resistant material; club head and hosel protection; sold in a regular and an oversized version for larger iron heads. No closure type was listed.
  • Who it suits: a golfer with forged or polished irons who rides in a cart or travels with the set, and who will take the covers off to dry after a wet round.

Price read in November 2026 at a U.S. golf retailer: $48.95, in both the regular and the oversized version. Both were shown out of stock on that date, so this price may not return in the same form.

Side by side

Headcover For Material, as published Closure Price read, Nov. 2026
Titleist Jet Black Leather Driver Headcover Driver 100% leather, two panels Not published $89.99
PING Icon Mallet Putter Headcover Most mallet putters Outer not published, velour lining Magnetic $34.99
Club Glove Gloveskin Premium Iron Covers Irons 4 to 9, PW, SW, XW Gloveskin neoprene, water resistant Not published $48.95 (out of stock)

None of the three pages read published a weight. Headcovers are sold more on looks than on specifications, so if the material or the fit matters to you, ask before you buy.

Iron covers: useful or not

Iron covers divide golfers more than any other piece of bag gear. Tour players rarely use them, and some golfers see them as a sign of fussiness. The arguments on each side are practical.

For covers: forged irons are made of soft carbon steel and mark easily when they knock together. Covers keep a new set looking new, for pride or for resale, and they quiet the bag on a cart.

Against covers: iron marks are cosmetic and do not change how the club performs. Nine covers add time on every shot, a cover left on the ground is a cover lost, and covers put back on wet clubs are the most cited cause of rust on irons. Many golfers use a bag with full-length dividers, or a towel over the heads, and accept the marks.

A fair conclusion: iron covers make sense for forged or raw-finish irons, frequent cart rides and travel, if you will dry the heads. For a cast cavity-back set in a divided bag, they add little.

What golfers are saying

What follows comes from owner reviews on retailer pages and golf forum discussions, and describes what recurs about headcovers of these kinds, not a verdict on any one of the three above.

What comes back in their favor:

  • A driver cover keeps the crown clean. Golfers who have seen a chipped crown on an uncovered driver are the most convinced users of headcovers, and many say they would not carry a driver or fairway wood without one.
  • Magnetic putter covers are quiet. Owners like that a magnetic flap closes without the ripping sound of hook-and-loop fabric on the green, and that it can be closed with one hand.
  • Leather holds its shape. Golfers who switched from knit to leather on their woods say a leather cover is easier to slide back on one-handed, does not stretch out, and looks better with age when kept dry.

What comes back against them:

  • Putter covers that fall off. The most repeated complaint: a weak magnet, or a hook-and-loop strip that has worn out, lets the cover drop off in the cart or on the walk between holes.
  • Covers left on the course. Golfers often report losing a headcover at a tee or beside a green, usually a fairway or hybrid cover set down on the grass. Bright colors, a name tag and the habit of putting the cover in a pocket rather than on the ground are the common answers.
  • Rust under the cover. Some golfers blame iron and putter covers for rust spots, and others reply that the cause is putting covers back on wet clubs and leaving them in a damp bag. Both groups agree that covers and moisture are a bad combination.
  • Fit that is too tight or too loose. New leather covers can be a struggle to pull over a large driver head until they break in, knit covers can catch on adjustable weights, and some mallet covers do not fit oversized putter shapes.

Nobody is quoted by name here, nothing has been counted, and none of these impressions is a measurement. They are what comes back most often in public reviews and golf forums.

On the rules: a headcover is not a rules matter. It is not a club, it does not count toward the fourteen-club limit, and nothing in the Rules of Golf says whether, or which, headcovers you may use.

Where to buy a headcover in the U.S., and what to ask

Headcovers are sold almost everywhere golf equipment is in the United States, and the best place depends on what you are buying.

  • The pro shop at your course. Most pro shops sell headcovers with the course or club logo, often in leather or knit. It is the place to try a cover on your own club, and a logo cover from a course you love is the classic gift for a golfer.
  • Golf superstores and specialty golf retailers. They carry the club brands’ covers next to the specialists’, in driver, wood, hybrid, putter and iron versions. Bring the club and try the cover on before paying, above all for large mallets and drivers with adjustable weights.
  • The club makers’ own sites. The surest fit if you have lost the original cover of a current model, usually at full list price.
  • Specialist and custom headcover makers. Small makers sell leather and knit covers in limited runs, and many offer embroidery, initials or a custom design. Ask about the return policy on personalized items, which is often limited.
  • Licensed team and college covers. NFL, MLB and college logo covers are a popular American gift. Judge the material and the closure, not only the logo.
  • Used and resale. Headcovers, especially tour and limited-edition covers, are traded on resale sites and in the used sections of golf shops. Check the closure, the seams and the inside lining, and be wary of counterfeit “tour” covers at prices well below what the brand charges.

Whatever the shop, ask four things: what the outer material is, what the closure is, which head shapes and sizes it fits, and how the cover should be cleaned and dried. If the answer to the material question is only “premium,” ask again.

How to choose before you buy

  • Cover the woods first. A driver and fairway woods have the most to lose in a bag. If you buy only one headcover, make it for the driver, with a sock long enough to cover the top of the shaft.
  • Match the putter cover to the head. Blade covers do not fit mallets, and some mallet covers do not fit oversized mallets. Try it on, and test the magnet or the strip by shaking the club gently.
  • Choose the material for your weather. Leather or PU for wet climates if you will dry it, neoprene for iron covers, knit if you like the look and play mostly in dry weather.
  • Decide on iron covers honestly. Worth it for forged or raw-finish irons, frequent cart rides and travel. Not necessary for a cast set in a bag with full-length dividers.
  • Make the covers easy to find. A bright color or a name tag helps when a cover is left on the grass at the turn.
  • Dry before you cover. Wipe the head, and after a wet round take every cover off at home and let clubs and covers dry apart.

A headcover is cheap insurance on the clubs with the most to lose, the driver, the woods and the putter, and an optional comfort on the irons. Buy it for the head it has to fit and the weather you play in, put it back on dry clubs, and pick it up off the tee box before you walk the next 400 yards to your ball.

How this page was put together

This is a presentation of products and a reading of public opinion, not a test. Nobody at Panxis Golf fitted, carried or handled any of these headcovers for this page. Features come from the makers’ published descriptions as reproduced on a U.S. dealer’s product pages: Titleist for the Jet Black Leather Driver Headcover, PING for the Icon Mallet Putter Headcover and Club Glove for the Gloveskin Premium Iron Covers. PING’s own U.S. page for the Icon blade cover was also read. Where a figure or a material was not published on the pages read, such as the outer material of the PING cover, the closure of the Titleist and Club Glove covers and the weight of all three, it is left out rather than estimated.

Prices were read on November 2, 2026, in U.S. dollars, at Carl’s Golfland, a U.S. golf retailer, for all three headcovers. The PGA TOUR Superstore product pages could not be read on that date, so no price from that retailer appears here. The $105.00 list price for the Titleist cover is the regular price shown by that retailer; the $40.00 for the PING Icon blade cover is the price on PING’s own U.S. site. Prices change with promotions, colors and stock, so the figure at checkout is the one that counts.

What golfers say was read in public owner reviews on retailer pages and in golf forum discussions, including The Sand Trap, the Team Titleist forum and the Practical Golf forum, some only through search excerpts. Nobody is quoted by name, nothing is counted, and no impression is presented as a statistic. There is no commercial link on this page, no affiliate arrangement and no commission of any kind. If content on this site is ever paid for by a brand, it will carry an advertising label at the top of the page.

One article a day not enough?

The monthly letter gathers what was worth reading, without the noise.

Also worth reading

Parcours de notre annuaire

Chevy Chase Club

North of Washington, the private club founded in 1892 as a hunt: golf since 1895, a course shaped by Donald Ross and C.H. Alison,…

Circling Raven Golf Club

Near Worley in the Idaho Panhandle, the Coeur d'Alene Tribe's public course: a Gene Bates design opened in 2003, 7,189 yards across 620 acres…